Palm eyecontact User Manual

Palm eyecontact software: user guide

Download this manual

user's guide version 2.0

Page 1 user’s guide version 2.0...
Page 2 Using eyecontact, you will be able to view your address entries along with an image. Images and thumbnails are in color when used with a color Handspring Prism.
Page 3 Quick Start Guide to eyecontact First, install the eyecontact application onto your Handspring handheld or other Palm OS device. The application can be downloaded from www.eyemodule.com. To attach an image to an address, tap the blank area to the right of the address. You can also attach images by tapping on the address to open it, then tapping on the Edit button.
Page 4 Address List View Launching eyecontact displays a list of the addresses in your address book. Addresses with images will have a camera icon next to them. Address View Addresses in eyecontact are presented the same way as in the regular address book, with the addition of an image.
Page 5 Images captured through eyecontact are also viewable from the eyemodule application. Due to Palm OS limitations, users with Palm 3.1 OS will not be able to view images on the Address Edit screen. However, images are viewable on Address View screens.
Page 6 “Beam Address” from the Record menu. Devices receiving an eyecontact address with an image must have the eyecontact application installed. Note: You cannot beam an entire category of addresses with their attached thumbnails.