Approved Algorithms - Samsung SAS 12G TCG Enterprise SSC SEDs PM1633a Series Manual

Samsung SAS 12G TCG Enterprise SSC SEDs PM1633a Series Security Policy

Approved Algorithms

The cryptographic module supports the following Approved algorithms for secure
data storage:
CAVP Algorithm
Cert.
617
3213
121 DRBG
932 ECDSA
3382
Exhibit 6 - Samsung SAS 12G TCG Enterprise SSC SED PM1633a Series
Approved Algorithms.
NOTE 1: The cryptographic module implements LSI Corporation's LSI-CS
DRBG in its original entirety without alteration. (I.e. there have been no
changes to the cryptographic algorithm boundary whatsoever). Testing was
carried out by LSI in a Synopsys VCS simulation environment; additional
algorithm validation testing in not required as per FIPS 140-2 IG G.11
NOTE 2: This module supports AES-XTS which is only approved for
storage applications.
This non-proprietary Security Policy may only be copied in its entirety without alterations including this statement. Samsung copyright 2016.
Standard
AES FIPS 197
SP 800-38A
AES FIPS 197
SP 800-38E
SP 800-90A
Revision 1
FIPS 186-4
SHS FIPS 180-4
Mode / Key Lengths,
Method Curves or Moduli
ECB 256-bit
XTS 256-bit
CTR_ DRBG AES-256
SigVer P-224
SHA-256
Page 8 of 19
Use
Data Encryption /
Decryption
Note: AES-ECB is
only utilized as the
pre-requisite for
DRBG #121; no
other modes or key
sizes are used and it
is not otherwise
exposed in this
implementation
whatsoever.
Data Encryption /
Decryption
Note: AES-ECB is
the pre-requisite for
AES-XTS; AES-ECB
alone is NOT
supported by the
cryptographic
module in FIPS
Mode.
Deterministic
Random Bit
Generation
Digital Signature
Verification
Message Digest