Safety Precautions - Advantech PAX-355-C8B-NA Series User Manual

4.1

Safety Precautions

Caution! FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING
WHEN SETTING UP AND USING THE LCD MONITOR.











If monitor or glass is broken, handle with care. Do not come in contact
with the liquid crystal.
Caution! Immediately unplug the monitor from the wall outlet and refer servicing
to qualified service power personnel under the following conditions:








PAX-355-C8B-NAx User Manual
DO NOT OPEN THE MONITOR. There are no user serviceable
parts inside and opening or removing covers may expose you to
dangerous shock hazards or other risks. Refer all servicing to qual-
ified service personnel.
Do not spill any liquids into the cabinet or use your monitor near
water.
Do not insert objects of any kind into the cabinet slots, as they may
touch dangerous voltage points, which can be harmful or fatal or
may cause electric shock, fire or equipments failure.
Do not place any heavy objects on the power cord. Damage to the
cord may cause shock or fire.
Do not place this product on a sloping or unstable cart, stand or
table, as the monitor may fall, causing serious damage to the mon-
itor.
When operating the LCD monitor with its AC power supply, use a
power supply cord you use must have been approved by and com-
ply with the international safety standards.
Do not place any objects onto the monitor and do not use the mon-
itor outdoors.
The inside of the fluorescent tube located within the LCD monitor
contains mercury. Please follow the bylaws or rules of your munici-
pality to dispose of the tube properly.
Do not use monitor in very hot, humid, dusty or oily areas.
Do not bend power cord.
Do not cover vents on monitor.
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet damaged.
If the monitor does not operate normally by following operating
instructions.
Allow adequate ventilation around the monitor so that heat can
properly dissipate. Do not block ventilated openings or place the
monitor near a radiator or other heat sources. Do not put anything
on top of monitor.
The power cable connector is the primary means of detaching the
system from the power supply. The monitor should be installed
close to a power outlet which is easily accessible.
Handle with care when transporting. Save packing for transporting.
24