Safety Instructions - Advantech AMIS-850 User Manual

Table of Contents

Advertisement

Safety Instructions

Strictly follow these instructions for use; please read these safety
1.
instructions carefully.
Keep this user manual for later reference; any use of the product requires
2.
full understanding and strict observation of all portions of these instructions.
Observe all.
3.
Repair of the device may also only be carried out by trained service personnel.
Advantech recommends that a service contract be obtained with Advantech
4.
Service and that all repairs also be carried out by them. Otherwise the
correct functioning of the device may be compromised.
Warning! Because of the danger of electric shock, never remove the box of a
If one of the following situations arises, get the equipment checked by
5.
service personnel:
Disconnect this equipment from any AC outlet before cleaning. Use a damp
6.
cloth. Do not use liquid or spray detergents for cleaning and keep this equip-
ment away from humidity.
Caution! To avoid short-circuits and otherwise damaging the device, do not allow
Put this equipment on a reliable surface during installation. Dropping it or
7.
letting it fall may cause damage. For plug-in equipment, the power outlet
socket must be located near the equipment and must be easily accessible.
Caution! Do not leave this equipment in an uncontrolled environment where the
Grounding reliability can only be achieved when the equipment is connected
8.
to an equivalent receptacle marked "Hospital Only" or "Hospital Grade".
Use a power cord that matches the voltage of the power outlet, which has
9.
been approved and complies with the safety standard of your particular
country.
If the integrity of the protective earth conductor is in doubt. Please turn off
10.
AMIS-850 User Manual
device while it is in operation or connected to a power outlet.
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according
to the user manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
fluids to come in contact with the device. If fluids are accidentally spilled
on the equipment, remove the affected unit from service as soon as pos-
sible and contact service personnel to verify that patient safety is not
compromised.
Storage temperature is below 0° C or above 50° C. This may damage the
equipment.
vii

Advertisement

Table of Contents
loading

Table of Contents