Table of Contents
Advertisement
Chapter 5 Using Address Book
To use Quick Connect from the Address list:
Highlight the Address entry to which you want to connect.
1.
Press Command Stroke
2.
Alternately, press Function
Record menu.
Select the method you want to use to connect.
3.
Quick Connect initiates the related task. For example, if you tap a phone
number, Quick Connect sends the selected phone number to your mobile
phone.
To configure Quick Connect settings:
From the Quick Connect dialog box, tap Settings.
1.
(Optional) Tap the Number Prefix check box and enter a prefix.
2.
For example, to dial 1 before all phone numbers, select this check box and enter
a "1" in this field. The prefix is not added to a number that begins with the "+"
character.
Tap each of the pick lists and select the application you want to associate with
3.
that task.
Press Function
4.
Tap-to-Connect
With Tap-to-Connect you can select an entry and initiate a related task by tapping
it with the stylus. By default, Tap-to-Connect is not enabled.
78
+ I.
+ Menu
+ Enter
or tap OK.
,
, and select Connect on the
Advertisement
Table of Contents
