Timing Inputs; Radio Configuration - FDS TBox-41 User Manual

TBox-Radio

3. Timing Inputs

The TBox-Radio comprises of 2 hardware inputs and 6 wireless Radio-Inputs
Manual Push Buttons (inputs 1 & 2)

 Jack inputs (inputs 1 & 2)
Working contact without potential (short-circuit)
 Wireless inputs for WIRC / WINP (inputs A - D)
Jack inputs:
1: Input
2: Reserve
3: GND
Each press of a manual push button, short-circuits on the Inputs or radio impulse are stored in
the TBox-Radio memory, with associated date and time of impulse.
The user has the ability to configure a locking time using the "TBox-Setup" App. This facility
allows the blocking of undesired impulses corresponding to the channel configured.
E.g. – To ignore multiple impulses from dirt or snow dust.

4. Radio configuration

The TBox-Radio is configured and linked to WIRC photocells using two Parameters:
 Group (radio frequency)
 Input/ID (TBox Input / WIRC-WINP serial number)
NOTE: TBox-Radio and WIRC photocells must be configured with an identical Group setting
February 2023 - Version EN 2.5
www.fdstiming.com
User manual