FDS TBox-41 User Manual page 12

TBox-Radio
12. Bluetooth
A Bluetooth connection can be established with compatible FDS timing or setup Apps.
After power up, the TBox broadcasts its presence for 2 minutes. During this period the TBox can
be detected and connected by the user App. To re-establish detection after the 2 minute period
simply press and release the power button to reactivate the Bluetooth broadcasting process.
13. Auto Timing (Training mode)
The TBox has been mainly designed to generate TOD for external timing applications. However
for training and auto timing purpose an internal timing mode has been implemented on the TBox
41 model.
- This mode has to be activated and all parameters set using one of our TBox Setting applications
- Beside the Start and Finish inputs, 2 intermediates are accepted
- For each inter and finish, a min and max detection time has to be defined
- The start pulse can be identified either using our RCID (RFID identification box) or with an auto
incrementing counter (max 250 then back to 1)
- This mode handles data output on an MLED display via RS232 or Radio as well as a on a printer
(Main RS232 jack or RS232 on the auxiliary connector)
14. Switches settings & shortcuts
During power On:
Switch <1> : Set GPS synchro
Switch <2> : set External synchro
While power is On:
Switch <1> short press :
Switch <2> short press :
Switch <Radio> short press :
Switch <Radio> long press :
Switch <1> & Switch <Power> short press :
Switch <Radio> & Switch <Power> long press : Lock/Unlock radio switch
February 2023 - Version EN 2.5
www.fdstiming.com
Manual pulse 1
Manual pulse 2
Radio Group change
Enter/Leave pairing mode
Change pairing input with short press
Print or download all TOD of the Run on RS232 port
User manual