Table of Contents
Advertisement
Quick Links
TBox-Radio
1. Appearance
The TBox-Radio is a compact and well equipped timing console. It accepts wired and wireless
peripherals like photocells, start gates or other starting devices. It has been mainly designed to
generate and deliver Time Of Day data to external timing applications.
TBox-41 (SN >= 00600):
2 x Jack Inputs
Ext GPS antenna
GPS LED
Power Status LED
TBox-41 (SN < 00600):
Ext GPS antenna
2 inputs LEDs
2 manual input
switches
February 2023 - Version EN 2.5
www.fdstiming.com
TBOX-RADIO
2 inputs LEDs
Radio antenna
2 manual input
Power Switch
switches
2 x Jack Inputs
Power Status
4 Group / ID
LEDs
Auxilliary connector
RS232 Jack
USB-C
Radio antenna
4 Group / ID LEDs
Mini USB
GPS LED
Power Switch
User manual
Radio
Config button
Radio
Config button
Auxiliary connector
RS232 Jack
Advertisement
Table of Contents
Summary of Contents for FDS TBox-41
- Page 1 The TBox-Radio is a compact and well equipped timing console. It accepts wired and wireless peripherals like photocells, start gates or other starting devices. It has been mainly designed to generate and deliver Time Of Day data to external timing applications. TBox-41 (SN >= 00600): 2 inputs LEDs Radio antenna...
- Page 2 TBox-Radio User manual TBox-40: Radio antenna 4 Group / ID LEDs 2 x Jack Inputs Radio Ext GPS antenna Config button 2 inputs LEDs Sync Jack RS232 Jack 2 manual Mini USB input switches GPS LED Power Switch Power Status February 2023 - Version EN 2.5 www.fdstiming.com...
-
Page 3: Power On/Off
TBox-Radio User manual 2. Power ON/OFF The ON/OFF switch has 3 functions: 1) Switch ON / OFF the TBox a) Press briefly the ON/OFF button (0.5s – 1.5s) until the battery status is indicated on the Input’s LEDs 1-4. b) Release the ON/OFF button and repress it within 1 second, and hold down until the 4 inputs LEDs are ON, and the audible beep signal is emitted (provided that the buzzer is not deactivated). -
Page 4: Timing Inputs
TBox-Radio User manual 3. Timing Inputs The TBox-Radio comprises of 2 hardware inputs and 6 wireless Radio-Inputs Manual Push Buttons (inputs 1 & 2) Jack inputs (inputs 1 & 2) Working contact without potential (short-circuit) Wireless inputs for WIRC / WINP (inputs A - D) Jack inputs: 1: Input 2: Reserve... - Page 5 TBox-Radio User manual 4.1. Groups (Radio Frequencies) - Europe / India / Russia 6 Groups are available. Group A, B, C, D: Wireless Transmission Distance: up to 2000m (clear line of sight) Each group uses ¼ of the full frequency band Min locking time of 200ms Group E, F: Wireless Transmission Distance: up to 5000m (clear line of sight)
- Page 6 TBox-Radio User manual To select your desired Group, press the Setup button The current Group selected is indicated by the LED array A, B, C & D. Release and press the number of times you want to change the setting. Group LED A LED B...
- Page 7 TBox-Radio User manual 4.3 TBox-Radio Input (WINP/WIRC Pairing) Each WINP/WIRC has a unique ID (serial number) that can be paired with a TBox-Radio input (A-F). Pairing can be performed on a TBox using the “TBox-Setup” application (no need to power ON WIRC/WINP).
-
Page 8: Radio Communication
Radio transmissions cannot be 100% guaranteed. An unfavorable environment, lack of line of sight, interference or an improper installation might lead to the loss of data. FDS cannot be held responsible for any of the above. 5.1. Time delay and precision... - Page 9 Jack-Stereo connection 3.5mm. In conjunction with the TBox-Setup, the protocol output can be configured by the user. FDS / TAG Heuer / Alge / Seiko Time of day protocol Serial printer LEDs Display Output (FDS-MLED & TAG Heuer)
- Page 10 Open circuit 10. Printer FDS offer a dedicated thermal printer which can be connected either to the TBox via its RS232 port or via Bluetooth using one of our iOS timing applications. In case of a TBox direct connection, all the TBox generated time stamps will be printed, as well as the synchro time and the GPS status if used in synchro.
- Page 11 Zero b) Internal Sync (TBox-41 only) This is the default synchro method for TBox-41. Once the TBox-Radio is switched ON, it is synchronized with the internal RTC. RTC value is updated during a GPS or App Sync c) GPS Sync ...
- Page 12 User manual 12. Bluetooth A Bluetooth connection can be established with compatible FDS timing or setup Apps. After power up, the TBox broadcasts its presence for 2 minutes. During this period the TBox can be detected and connected by the user App. To re-establish detection after the 2 minute period simply press and release the power button to reactivate the Bluetooth broadcasting process.
-
Page 13: Technical Specifications
865 - 867 MHz 100mW Russia 868.7 - 869.2 MHz 100mW North America 920 - 924 MHz 100mW Japan (TBox-41 only) 922 - 927 MHz 20mW Inputs precision 1/10’000 sec Operating temperature -20°C to 60°C Battery charge possible only between 0°C and 45°C Timer Precision 1ppm @ 20°C, Recalibration possible at 0.2ppm... - Page 14 The sale of products, services of goods governed under this publication are covered by FDS standard Terms and Conditions of Sales and this product publication is provided solely for informational purposes.