Table of Contents
Advertisement
Quick Links
related literature |
003-735
1.
General
This document describes installation of a splitter box kit into the Corning Optical Communications
OptiTect
®
local convergence cabinet, Gen III series (Figure 1) to provide additional capacity.
2.
Carton Contents
•
Splitter box kit (Figure 2) (p/n FDH-G3-
SplTrBX-KITVZ), consisting of
•
(1) Splitter box
•
(1) Splitter box plate
•
(3) #6-32 x .50 stainless steel panhead
screws
•
(1) Standard recommended procedure
(Srp) 003-979-AEN
STANDARD RECOMMENDED PROCEDURE 003-979-AEN | ISSUE 1 | AprIl 2014 | PAGE 1 OF 5
®
Instruction, OptiTect
OptiTect
Cabinet, Gen III Series,
Splitter Box Kit
p/n 003-979-AEN, Issue 1
Gen III local Convergence Cabinet
TPA-4652
®
local Convergence
Splitter box (x1)
Underside
Screw (x3)
view
Figure 1
Top view
Plate (x1)
Figure 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CORNING OptiTect Gen III Series
Summary of Contents for CORNING OptiTect Gen III Series
- Page 1 ® 003-735 Instruction, OptiTect Gen III local Convergence Cabinet General This document describes installation of a splitter box kit into the Corning Optical Communications OptiTect ® local convergence cabinet, Gen III series (Figure 1) to provide additional capacity. Figure 1...
- Page 2 Tools and Materials Required • phillips screwdriver • 216B tool or a -in nutdriver (for entry into the interior of the cabinet) • Dry-process connector cleaning supplies Precautions WARNING: Never look directly into the end of a fiber that may be carrying laser light. laser light can be invisible and can damage your eyes.
- Page 3 Step 3: Align the holes on the plate with the screw holes on the panel and secure the plate with the three screws provided in the kit. TPA-4654 Figure 4 Step 4: Install four splitters inside the splitter box (Figure 5) and secure them to the box with the captive fasteners.
- Page 4 Store the connectors in the connector parking field on the cabinet door. To properly Step 6: close the door without pinching fibers: Use fields C and D when installing up to 288 fibers. • Use fields C, D, and E when installing up to 432 fibers •...
- Page 5 A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2014 Corning Optical Communications. All rights reserved.
Need help?
Do you have a question about the OptiTect Gen III Series and is the answer not in the manual?
Questions and answers