Subscribe to Our Youtube Channel
Related Manuals for CORNING UNISUB 1U
Summary of Contents for CORNING UNISUB 1U
- Page 1 Installation Instruction Issue 1, November 2013 UNISUB 1U UNISUB 1U Splitter These instructions are provided as a guideline for the trained craftsperson.
- Page 2 3 FRM splice trays or 1 tray and splitter in second variant. Subrack has an easy and full front access and can be opened on both sides after simple on-site conversion. 1.1 Tools required 1. Philips screwdriver 2. Open end wrench no.10 Unisub 1U, Unisub 1U Splitter...
- Page 3 4. Cage nuts with screws (4x) 5. Cable ties 6. Installation instruction 7. Default cable guide 8. Spring plunger 2.1 Accessories (ordered separately) 1. Cable guide (left) 2. Cable guide (right) 3. Bracket set for 21" frame (left + right). Unisub 1U, Unisub 1U Splitter...
- Page 4 (also at the bottom). Note: above operation can be also carried out after installation in the frame, however it requires free space above and below subrack. Unisub 1U, Unisub 1U Splitter...
- Page 5 To use side cable guides leave screws not tightened 4.4 Slide in the cable guide between screws and subrack holder and tighten screws. Cable guides can be installed on the both sides of the subrack. slide Unisub 1U, Unisub 1U Splitter...
- Page 6 Slingle spiral wrap 5.3 Insert protective tube with attached spiral wraps into the strain relief. 5.4 Guide spiral wrap through the subrack to splice cassette as shown in the picture. Unisub 1U, Unisub 1U Splitter...
- Page 7 5.6 Feed fiber (or 900 µm) through the spiral wrap into the FRM splicing cassette. Corning recommends to store at least 120 cm stripped fiber inside the cassette. NOTE: After installation secure the spiral wrap with locking bolts.
- Page 8 Corning Cable Systems Polska Sp. z o.o. accepts no liability for any damage arising from improper use of the product. The extent of any liability in specific instances shall be limited to the General Terms and Conditions of Sale from Corning Cable Systems Polska Sp.
Need help?
Do you have a question about the UNISUB 1U and is the answer not in the manual?
Questions and answers