Download Print this page
SUOMY SR SPORT Manual
Hide thumbs Also See for SR SPORT:

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the SR SPORT and is the answer not in the manual?

Questions and answers

Summary of Contents for SUOMY SR SPORT

  • Page 2 Certification Bodies. Suomy cannot be held responsible for direct or indirect damages resulting from an incorrect use of the product and/or for using the helmet in situations that go beyond the normal conditions of use or the modalities indicated in this booklet.
  • Page 3 Interchangeable side cheek pads, available in different thicknesses to assure the best fit for all head sizes. The SR SPORT ventilation system along with the particular shape (Suomy patent) of the internal polystyrene shell, optimizes outside and inside air flows, fed by three air intakes, which exploit the Venturi effect thus optimizing internal ventilation. The four back air inlets release the air flows.
  • Page 4: General Rules

    Do not use scarves or neck guards which could make the strap slide and the helmet fly off in case of crash. SR SPORT was designed to be used with most of the eyeglasses on the market. In any case check how the helmet fits with the glasses before purchasing it.
  • Page 5: Use And Maintenance

    Do not apply paint and/or adhesives on the visor. Only use original Suomy accessories and spare parts or those specifically indicated by Suomy for the specific model: this is the only way to assure reliability, safety and compatibility with the helmet used.
  • Page 6 Caution: do not clean the visor inside, because the ANTIFOG MIST RETARDANT could be damaged and thus affect the duration and efficiency of the visor itself. Suomy therefore, cannot be held responsible if this should occur. During cleaning operations, carefully handle the visor to avoid damaging the anti-scratch and anti-fog coating. Never use solvents, alcohol, fuels, thinning substances or abrasive powders;...
  • Page 7 «D Rings ». Use the unlocking tongue only to remove the helmet! Never unlock while riding. If the retention system does not work correctly, do not use the helmet and contact Suomy authorized personnel only. FRONT AIR INTAKE (CHIN) - OPERATION...
  • Page 8 REAR AIR VENTS - OPERATION see figure 5 The innovative rear air intake on the SR SPORT has been designed to further improve ventilation inside the helmet, using residual air flows that, again thanks to the Venturi effect, are able to...
  • Page 9 Inner side padding: CHEEK PADS – Assembly and disassembly The cheek pads are fixed to the inner lining of the helmet through a mechanism applied to the chin guard that can be operated without using any tools (Suomy Patent). Removing the pads see figure 7 Push (X) the lever (A) towards the back part of the helmet until it is unlocked.
  • Page 10 USE and MAINTENANCE Verify that the part was assembled correctly by checking that: - the cheek pad is firmly locked in position - that the strap is completely free inside the hole and was not blocked under the cheek pad during assembly.
  • Page 11 USE and MAINTENANCE VISOR scratches on the surface there could be unusual light reflections or deviations, which may jeopardize safety. Immediately replace the visor if there are such problems. How to operate see figure 9 Operate the visor by using the lifting lever (A). Do not open it using other areas to avoid causing accidental damages (scratches or lines) or dirtying the field of vision.
  • Page 12 After fitting the mechanism verify that the visor is tightly fixed to the helmet, that it rotates freely and that it locks correctly into the locking positions. If this doesn’t happen and the rotation mechanism of the visor doesn’t work correctly, do not use the helmet and contact Suomy authorized personnel only.
  • Page 13 After fitting the mechanism verify that the visor is tightly fixed to the helmet, that it rotates freely and that it locks correctly into the locking positions. If this doesn’t happen and the rotation mechanism of the visor doesn’t work correctly, do not use the helmet and contact authorized Suomy personnel only. figure 11...
  • Page 14 If this doesn’t happen and the nose guard does not adhere to the edge of the shell or is not positioned correctly, do not use the figure 12 helmet and contact authorized Suomy personnel only. View other motorcycle helmets made by Suomy on our website.