Baltic POSEIDON User Manual page 12

ENGLISH
REARMING BALTIC AUTOMATIC VERSION
Unscrew the used capsule anticlockwise
1.
label by the inflation mechanism. Replace the capsule if it has been activated or if it has
passed its expiry date
2022 means it must be replaced before February 2022.
Refit the examined capsule if ok if not screw in a new capsule clockwise and tighten it by
2.
hand until no threads are visible. The lower indicator window on the valve head should now
be green.
Unscrew the CO
3.
ly manner. Check that the lever and the pin (visible at the bottom of the valve head next to
the CO cylinder's fastening)
2
back the lever and secure it by pressing it against the valve head until it clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
4.
fastening, is undamaged
Screw in a new, clean and unpierced CO
5.
tight. Use no tools.
When both capsule and CO
green.
REARMING BALTIC MANUAL VERSION
Unscrew the CO
1.
ly manner. Check that the lever and the piercing pin (visible at the bottom of the thread for
12 the CO cylinder
2
and secure it by pressing it against the valve head until it clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2.
fastening, is undamaged
Screw in a new, clean and unpierced CO
3.
tight. Use no tools.
When the CO
2
, which is stamped on the side of the capsule. For example, 02
5
cylinder anticlockwise. Discard the cylinder in an environmentally friend-
2
can move freely, by pulling on the activating cord. Fold
10
.
11
cylinder are mounted correctly, both indication windows should be
2
cylinder anticlockwise. Discard the cylinder in an environmentally friend-
2
can move freely, by pulling on the activating cord. Fold back the lever
10
.
11
cylinder is mounted correctly, the indicator window should be green.
, Follow the illustrated instructions on the
9
cylinder using only hand force until absolutely
2
cylinder using only hand force until absolutely
2
cylinder's
2
cylinder's
2
5-1