Venting Methods; Parts List - Samsung NK30CB700W Series Installation & User Manual

Installation Requirements

Venting Methods

Smoke is exhausted to the outside through a special pipe connected to the hood.
Roof Venting
Roof Venting
A
B
A. Roof cap
A. Roof cap
B. 6" (15.2 cm) B. 6" (15.2 cm)
CAUTION
• The minimum connectable exhaust outlet diameter is 6" (15.2 cm).
• Ensure the exhaust outlet diameter and duct diameter match, and then connect
the duct to the wall outlet.
• If the duct and the wall outlet have different diameters, the suction performance
will decrease while also significantly increasing noise.
The manufacturer is not responsible for any problems caused by this.
• Use the minimum possible length for the duct, and do not significantly alter the
cross-section.
• When connecting the duct, minimize bending. (Max bending angle: 90˚)
• In an environment where installing with an external venting method is possible,
be sure to install only using the external venting method.
8 English
FULL_NK30CB700W33AA_DG68-01416B.indb 8 FULL_NK30CB700W33AA_DG68-01416B.indb 8
(Recirculating)
Wall Venting
Wall Venting (Recirculating)
A
B
B
A
A. Wall cap A. Deflector
A. Wall cap A.
B. 6" (15.2 cm) B. 6" (15.2 cm) B. 6" (15.2 cm) B. 6" (15.2 cm)

Parts List

User & Installation Template for
manual (2) Installation (1)
Duct Cover Mounting Electric Damper (1)
Bracket (1) NK3*CB700W** only
Damper Adapter (1) Upper Duct Cover (1)
5 mm Magnet (2) Filter Support Cable * (2)
* To reduce the risk of the filter dropping, assemble the filter support cable to the filter.
Hood Mounting
Bracket (1)
Damper (1)
NK3*CB600W** only
Lower Duct Cover (1)
2023-03-30 오전 11:17:26 2023-03-30 오전 11:17:26