Making A Hole In The Furniture - Samsung NK30CB700W Series Installation & User Manual

Installation Requirements

Making a hole in the furniture

Duct hole guide_Op.1
Cabinet floor drilling work: hood exhaust outlet (damper) cutting work
Rear (Wall)
Max
3
(0.5 cm)
Min
(2.0 cm)
Front
CAUTION
• Cut the cabinet in a way that does not interfere with the damper outlet.
• After assembling the duct cover, make sure that the cut surface of the cabinet is
not exposed. (The hole size must be smaller than the duct cover.)
• Vacuum the sawdust to prevent it from blowing away.
• Make sure the cabinets are not damaged.
• Before cutting the cabinet, explain to the customer that the cabinet needs to be
cut, and then obtain consent before proceeding.
Method and sequence of cutting the upper cabinets
1. Refer to the cutting dimensions above and mark the lines to be cut on the cabinet.
2. Use a jigsaw to cut the upper cabinets. When cutting, use a vacuum cleaner to
minimize the amount of dust.
Installation Tool
10 English
FULL_NK30CB700W33AA_DG68-01416B.indb 10 FULL_NK30CB700W33AA_DG68-01416B.indb 10
Furniture's Center Line
/ "
16
Min
Duct
8 / "
11
16
Hole
(22.0 cm)
/ "
13
16
Min 6 5 / " (16.0 cm)
16
Max 6 / " (17.0 cm)
11
16
Jigsaw
Duct hole guide_Op.2
Cabinet floor drilling work: hood exhaust outlet (damper) cutting work
Rear (Wall) Furniture's Center Line
Cutting Area
Front
13 /
3
8
CAUTION
• Cut the cabinet in a way that does not interfere with the damper outlet.
• Vacuum the sawdust to prevent it from blowing away.
• Make sure the cabinets are not damaged.
• Before cutting the cabinet, explain to the customer that the cabinet needs to be
cut, and then obtain consent before proceeding.
Method and sequence of cutting the upper cabinets
1. Refer to the cutting dimensions above and mark the lines to be cut on the cabinet.
2. Use a jigsaw to cut the upper cabinets. When cutting, use a vacuum cleaner to
minimize the amount of dust.
Installation Tool
" (34.0 cm)
Jigsaw, Grinder
2023-03-30 오전 11:17:27 2023-03-30 오전 11:17:27