Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the N
4.
Engage the parking brake.
5.
Shut off the engine and remove the key.
Description
No parts required
No parts required
Discharge baffle
Bagger baffle
Carriage bolt (3/8 x 7/8 inch)
Locknut (3/8 inch)
Carriage bolt (5/16 x 7/8 inch)
Locknut (5/16 inch)
Side discharge chute with gate
Hex-head bolt (5/16 x 7-1/2 inches)
Locknut (5/16 inch)
Spacer
Spring
Control box assembly
Carriage bolt (3/8 x 7/8 inch)
Locknut (3/8 inch)
Cable tie
Adhesive cable tie
Qty.
–
Prepare the machine.
Remove the existing side discharge
–
chute.
1
1
4
Prepare the mower deck.
4
1
1
1
1
Install the side discharge chute with the
1
gate.
1
1
1
2
2
Install the control box.
3
1
-L
position.
EUTRAL
OCK
2
Use
Advertisement
