Page 1
Form No. 3459-941 Rev A Universal Wireless Hour Meter Kit Model No. 144-2436 Installation Instructions Installation Preparing the Machine No Parts Required Procedure Park the machine on a level surface. Engage the parking brake and/or shift the transmission lever to the P (PARK) position.
Page 2
g420919 Figure 1 6. Round bezel adapter 1. Cable tie (3) 2. Hour-meter assembly 7. Round bezel mount cover 3. Rear clip mount 8. Hex socket bolt (#8 x 1 inch) 4. Keps nut (#8) 9. Front bezel mount 5. Existing part from existing hour meter (part no. 105-0039) 10.
Page 3
Installing the Wireless Hour Meter to the Inside of the Machine Parts needed for this procedure: Wireless hour meter g421056 Figure 3 Cable tie Procedure Determine the installation location for the wireless hour meter based upon application (e.g., under the hood). Installing the Wireless Hour Connect the wireless hour meter connector to the machine wire harness connector...
Page 4
Secure the hour meter to the machine using a mount and fasteners shown in Figure Connecting the Battery No Parts Required Procedure Connect the negative (-) battery cable to the battery post.