MegaTec NetAgent Mini User Manual page 90

2. Use FTP to update (suitable for BK,CK,DK,BP,CP,DP using firmware
version 2.35 and later)
The FTP is a easy and common way to upload the latest firmware into the
NetAgent. Please follow the instruction below to update the firmware. If there is
other FTP client application on your computer, that will also be fine to use it for
updating the firmware.
For example: if wish to update the latest firmware of the NetAgent UPS which IP
address is 192.168.50.179, then please operate with the steps below:
(1) Enter Windows, then type ftp 192.168.50.179 under "Run" of the "Start Menu"
(2) After executed, the systems will requests for the user name and password. Please
enter "admin" under the user name and enter the password that was been set at
Netility under password. If did not set before, then please enter the default value as
user name: "admin" and nothing under password. (press "Enter").
- Once the account and password been checked, the server will response with 230
OK to indicate Login succeeded.
- If entered wrong account and password, the server will response with 530 Not
Logged in to indicate Login failed.
(3) Operation commands as followings:
-1s: This command is to request server to list up all the file and sub file under current
Menu. User may finds out the firmware version of the NetAgent UPS of its IP.
-put<client's file route>: This command is to ask the client to copy its specific file route
to the Server point. User may use this method to upload the latest firmware to the
remote NetAgent
-quit: This command is to allow the user to logout with the current username account
as well as close the connection of FTP.
For example: The picture below is to upload the latest NetAgent firmware file (c:\
work\netagent\prjs\nag\2.32.DK520.bin ) which is in this computer to the NetAgent
UPS with IP address of 192.168.50.179
85