Environment Sensors-Netfeeler Lite - MegaTec NetAgent Mini User Manual

2.1.7 Environment Sensors-NetFeeler Lite

A NetAgent with three ports can be connected to a NetFeeler Lite to detect the
environment status. NetFeeler Lite can detect Temperature , Humidity and
water(Water). It can receive signals from wireless smoke sensors, gas sensors
and security sensors to detect further environmental conditions.
This page is to show details of the environment detected by NetFeeler Lite.
Users can choose an interval from the drop-down box to refresh the status. All
settings can be set in the Configuration/NetFeeler Lite page. The status will be
displayed in red when NetFeeler Lite detects an abnormal status condition. In
addition, NetFeeler Lite will also set off an alarm for notification.
NetFeeler Lite Status
Environmental Temperature
This section is to show current temperature which is detected by NetFeeler Lite.
Environment Humidity
This section is to show current humidity which is detected by NetFeeler Lite.(shown
as%)
Water Status
This section is to show water presence (ie. flood)which is detected by NetFeeler
Lite.
Gas Status
This section is to show gas presence which detected by gas sensor. When leakage
of gas detected, sensor would beep and stops only when gas vanish.
Smoke Status
This section is to show smoke presence (ie. fire) which is detected by smoke
sensors.
Security Status (Security1 ~ Security7)
This section is to show open/close status for doors and windows. NetFeeler Lite can
monitor up to 7 Security Sensors.
Fig.26 Environment Sensors - NetFeeler Lite
25