Remote Control - MegaTec NetAgent Mini User Manual

2.1.4 Remote Control

This page is to provide remote UPS test functions. Choose the test item, then
click on 'Apply' to execute it. (Please refer to the UPS manual for individual
UPS Test functions.)
If you are using a Contact Closure UPS, you will only be able to use the
function ' Turn off UPS when AC Failed'.
Cancel Test
This function is to abort a test when it is executing.
Turn off UPS when AC failed/Reboot UPS
Selecting ' Turn off UPS when AC failed' will turn off the UPS. You can reboot the
UPS by selecting ' Reboot UPS'.
Put UPS in Sleep mode for __ minutes/Wake up UPS
When the UPS is put into Sleep mode, it will not provide power. The UPS will
provide power again after Sleep mode time is complete.
Reboot UPS
When execute such command, UPS load would start over.
Fig.23 Remote Control
22