Sms - MegaTec NetAgent Mini User Manual

2.2.6 SMS

When NetAgent detects UPS events, it allows Short Message Signals ("SMS")
be sent and received using a GSM Modem. Operation information are as
below for single and three ports of NetAgent.
2.2.6.1 To send SMS by single port of NetAgent
It requires to use remote "SMSAgent" to send SMS.
SMS Settings
SMS Server, SMS Server Port
This section is to set SMSAgent's IP address (e.g. 192.168.0.180) and Port Number
(default:80)
Account Name, Password
This section is to set SMSAgent's account, password (SMSAgent webpage
Configuration Web/Telnet)
Send SMS When Event Occurs
Select YES to receive SMS when an Event Occurs. NO (default) to disable
Receiver cellular number (for Event Log)
This section is to set the recipient's mobile number. A total of 8 mobile numbers can
be assign. (Selectable events list is same as SNMP webpage. Refer to page 35,
figure 31 :UPS Event)
Note: 1) Enter mobile number same as sending from mobile.
Note: 2) Please refer to SMSAgent's user manual for further information.
Fig.33 SMS
39