Table of Contents
Advertisement
USB Device Port
The Net-960CE-S provides a USB device port to enable connection to devices that
have a USB host port, such as laptops. This port is especially useful for interacting
with the Net-960CE-S by downloading firmware, applications and configurations. It
can also be used for software and technical support.
This functionality complies with Universal Serial Bus Specification Rev. 1.1 and
supports full-speed (12 Mbit/s).
USB Host Ports
The Net-960CE-S optionally provides two USB 2 host ports connected through a
double USB host connector. These ports enable the connection to devices that have a
USB device interface, such as USB printers, USB keyboards, USB memory storage
devices and so on. For further details, refer to the USB Host Connector section, page
49.
This functionality complies with Universal Serial Bus Specification Rev. 2.0 and
supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
CANBus Port
The Net-960CE-S optionally provides a CANBus port that enables the connection of
a variety of vehicle peripherals through the EXT1 connector, such as the vehicle's
computer, vehicle's sensors and so on. For further details, refer to the EXT1
Connector section, page 51.
The provided CANBus V2.0B (a 1 Mbit port) supports the following functionality:
• 0 - 8 byte length in the data field
• Standard and extended data and remote frames
• Two receive buffers with prioritized message storage
• Six 29-bit filters
• Two 29-bit masks
• Three transmit buffers with prioritization and abort features
Advertisement
Table of Contents
