Table of Contents
Advertisement
Usage time check
This function is only supported by Free Joint Multi systems.
Use the Usage time function to check the operation duration from the
moment when the air conditioner is turned on to the moment when the
Usage time function is selected. The usage time is displayed on the indoor
unit display for a few seconds, and the set indoor temperature appears.
In operation
Select Usage.
The usage time is displayed in units of hour. For example, 0.1 is equivalent
to 6 minutes; 2.5, 2 hours and 30 minutes; 3.7, 3 hours and 42 minutes.
The value range displayed is between 0.0 and 99. The value is reset when
the air conditioner turns off.
NOTE
The usage time shown on the indoor unit display may a little differ
from the actual operation time of the air conditioner.
You can view the usage time only when the air conditioner is operating.
Beep function
Use the Beep function to turn on or off the beep that sounds when
you press a button on the remote control.
Select Beep.
English
25
Advertisement
Table of Contents
