SAFETY INTRODUCTION 1.Please read the manual carefully and keep it for future reference. 2.All safety instructions and warnings must be adhered to. They are par t of the manual and must be kept with the manual. 3.Any guarantee claims are rendered invalid if damage occurs due to non-observance of these operating instructions.
Page 3
19.Electrical appliances must be kept out of the reach of children. Be par ticularly careful if children are pre- sent. Children are not aware of the hazards involved in handing electrical appliances improperly. Children could attempt to poke objects into the appliance. There is a life-threatening danger of electrocution. 20.Do not leave the appliance unattended while operating it.
Page 5
1.[MIC/LINE 1 INPUT PANEL SECTION]-In this panel section there is a connector (female XLR-type) that accept balanced MIC or LINE level signals. By using LINE/MIC switch it is possible to adapt the gain to microphone or line level signal; The LEVEL knob allows to adjust the input signal level.
STAND FLANGE 7° 0° DUAL TILT FLANGE The speakers have a stand flange with a 0° angle socket (rear position) and a socket with a 7° tilt angle (front posi- tion). Examples of use:Use the socket with a 0° angle for standing audiences and the socket with a 7° tilt angle for seated audiences.
TECHNICAL SPECIFCATIONS APOLLO-ACTIVE SERIES Model: APOLLO 10A APOLLO 12A APOLLO 15A Type: 2-Way bi-amp powered speaker bass reflex type Frequency response: 55Hz-19kHz 50Hz-19kHz 45Hz-19kHz Power output(RMS/peak): 350W/700W 400W/800W 450W/900W Amplifier Type Class D + Class AB Class D + Class AB...
Need help?
Do you have a question about the APOLLO 10A and is the answer not in the manual?
Questions and answers