Page 2
SAFETY INTRODUCTION 1.Please read the manual carefully and keep it for future reference. 2.All safety instructions and warnings must be adhered to. They are par t of the manual and must be kept with the manual. 3.Any guarantee claims are rendered invalid if damage occurs due to non-observance of these operating instructions.
Page 3
19.Electrical appliances must be kept out of the reach of children. Be par ticularly careful if children are pre- sent. Children are not aware of the hazards involved in handing electrical appliances improperly. Children could attempt to poke objects into the appliance. There is a life-threatening danger of electrocution. 20.Do not leave the appliance unattended while operating it.
Page 5
1.LEVEL Adjust the volume of your microphone, instrument or audio source. MIC/LINE IN SELECTOR Switch for the signal level at the input. Switch released: Line level, switch pressed: microphone level. 3.REVERB SWITCH Switch released: OFF, switch pressed: ON. 4.COMBI INPUT Inputs for line or microphone level signals (XLR / 1/4"...
Page 6
SETUP A. Subwoofer with integrated electronics for all system components. B. Two identical spacers with connectors on bottom and top C. Column element with the speakers and a connection on the bottom. Once the subwoofer is placed in the desired location, plug the spacers into the subwoofer and then add the column element with the speakers.
Page 7
TECHNICAL SPECIFCATIONS Model: MERCURY P8 Type: Ultra Por table Column PA System with Mixer Frequency response: 50Hz-20kHz(-10dB) via integrated system filter Power output(RMS/peak): 400W 1200W Amplification: Class D +1xClass AB Input sensitivity: (selectable) 0dBu SPL(1W/1m): 95dB Max.SPL: 121dB Protection circuits:...
Need help?
Do you have a question about the MERCURY P8 and is the answer not in the manual?
Questions and answers