Table of Contents
Advertisement
SYSTEM CO N N ECTIO N S
Connecting/
Using A
Decoder
TV Receiver
AV2 IN/DECODER
Back of
H R-J548E
Satellite
antenna
Satellite tuner
Downloaded from:
https://www.usersmanualguide.com/
RF Cable (provided)
TV Aerial
Cable
AV1 IN/OUT
Back of
H R-J748E/ EH
D ecoder
The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.
SELECT IN PUT MO DE
1
Set "AV2 SELECT " to "DECODER". (
CO N N ECT DECO DER
2
Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART
cable.
SET TUN ER
Perform the procedure as described in "When Receiv-
3
ing A Scrambled Broadcast" on page 40.
N O TE:
W hen Connecting A Satellite Tuner . . .
. . . if you don't have a decoder connect the satellite tuner
directly to the video recorder's AV2 IN/DECODER connector.
. . . if you have a decoder, first connect the decoder to the
decoder input of the satellite tuner, then connect the satellite
tuner's output to the recorder's AV2 IN/DECODER connector.
Refer to the instruction book for the satellite tuner and decoder.
. . . set "AV2 SELECT " to "AV2". (
. . . to view a programme via the satellite tuner, select AU 2
mode by pressing N U M BER keys and/or TV PRO G. so that
"AU-2" appears on the display panel.
35
EN
pg. 32)
pg. 32)
Advertisement
Table of Contents
