JVC HR-J748EH Instructions Manual page 5

PU SH JO G
Language Code
ENGLISH : 01
DEUTSCH : 02
FRANCAIS : 03
ITALIANO : 04
CASTELLANO : 05
Auto Set U p results appear on the front
display panel
● If Auto Set Up is completed, go to page 6.
Downloaded from: https://www.usersmanualguide.com/
O K
NEDERLANDS : 06
SVENSKA : 07
NORSK : 08
SUOMI : 09
DANSK : 10
● When both auto channel
set and auto clock set have
been completed success-
fully the correct current
time will be displayed.
● When auto channel set has
been completed success-
fully but auto clock set has
not, "CH" will be displayed.
● When neither auto
channel set nor auto clock
set has been completed
successfully, "--:--" will be
displayed.
SELECT LAN GUAGE
Press O K . the Language Set display appears on the front
3
display panel and/or on the screen.
If you are referring to the front display panel
Press PU SH JO G % fi to select your language code
referring to the chart in the left column.
(Ex.) DEUTSCH is selected for SUISSE
International telephone
country code
If you are referring to
the on-screen display
Press PU SH JO G % fi to
move the highlight bar
(pointer) to the language of
your choice.
PERFO RM AUTO SET UP
4 Press O K .
"Auto" appears on the display panel and blinks; do
NOT press any button on the recorder or remote
control until the display panel shows the current
time or "CH1" or "--:--". (Refer to box on lower left
of page.)
● Auto channel set function takes place first; it assigns
automatically all receivable stations in your area.
● Auto clock set function sets the clock automatically
by reading the clock setting data from a station
transmitting a PDC signal while auto channel set is
being performed.
● During auto channel set, the recorder recognizes each
station name of the detected stations and stores them
in the recorder's memory, then automatically sets
S V assigned Guide Program number for those
HOW IEW
stations according to the broadcast area.
N O TE:
In the area where no TV station transmits a PDC signal,
the recorder can perform neither auto clock set nor
auto Guide Program number set.
N O TES:
● If you are using the on-
screen display, the AUTO
SET screen will appear after
pressing O K in step 4 . As
Auto Set Up progresses, the
" " mark on the screen
moves from left to right.
● If there is a power cut, or if
you press or M EN U
while Auto Set Up is in
progress, Auto Set Up will
be interrupted; be sure to
turn off the recorder power once and try again from step 1 .
EN
Language code
DANSK
SUOMI
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
[ 5 ∞] =
[MENU] : ENDE
(Ex.) DEUTSCH is selected
AUTO SET
PLEASE WAIT
+ + +
0
[MENU] : EXIT
Beginning
5
End