Table of Contents
Advertisement
6
EN
If both a uto cha nnel set a nd a uto clock set ha ve been performed successfully:
Perform "Video Channel Set" on page 8.
1
Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the
2
recorder's memory by using the TV PRO G. button(s).
● If station names (ID —
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change
station names, see pages 40 – 41.
Perform "S
3
HOW
If a uto cha nnel set ha s succeeded but a uto clock set ha s not:
Perform "Video Channel Set" on page 8.
1
Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the
2
recorder's memory by using the TV PRO G. button(s).
● If station names (ID —
top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.
● If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change
station names, see pages 40 – 41.
Perform "Clock Set" on page 43, then "S
3
correctly.
If both a uto cha nnel set a nd a uto clock set ha ve fa iled:
Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the
1
recorder power back on again.
● The Country Set display appears on the front display panel and/or on the screen; perform steps
again.
IM PO RTAN T
● Depending on the reception conditions, the station names may not be stored correctly, and auto Guide Program Number Set may
not work properly. If the Guide Program numbers are not set properly, S
correctly; be sure to check if the Guide Program numbers have been set correctly (
● Since your video recorder memorizes all detected stations even if the reception condition is poor, some of those stored stations
may produce a noisy picture. To delete those stations,
IN FO RM ATIO N
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made
in step 2 on page 4 (unless you have selected BELGIUM or SUISSE), as shown below.
SUOMI
PORTUGAL
DEUTSCHLAND [ DEUTSCH
NORGE
If you want to change the language setting manually,
Just Clock
Your recorder is equipped with the J ust Clock function which provides accurate time keeping through automatic adjustments at
regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to "ON".
"J ust Clock" on page 43.
Downloaded from:
https://www.usersmanualguide.com/
pg. 42) have also been stored in the recorder's memory, the station name will be displayed at the
V
Setup" on page 10 to check if the Guide Program numbers have been set correctly.
IEW
pg. 42) have also been stored in the recorder's memory, the station name will be displayed at the
HOW
[ SUOMI
SVERIGE
[ ENGLISH
DANMARK
ÖSTERREICH
[ NORSK
ITALIA
V
Setup" on page 10 to check if the Guide Program numbers have been set
IEW
HOW
"Delete A Channel" on page 40.
[ SVENSKA
[ DANSK
[ DEUTSCH
[ ITALIANO
"Language" on page 7.
IN ITIAL SETTIN GS (cont.)
2 and 4 on pages 4 – 5
V
timer recording (
pg. 26) will not work
IEW
pg.10, "S
V
Setup").
HOW
IEW
ESPAÑA
[ CASTELLANO
NEDERLAND [ NEDERLANDS
GREECE
[ ENGLISH
OTHERS
[ ENGLISH
Advertisement
Table of Contents
