Table of Contents
Advertisement
OPERATING
INSTRUCTIONS
Play Vinyl record
Before use, please ensure:
•
Stylus (needle) Protector should be removed
from Stylus Cartridge before use.
•
Place one vinyl record on the platter at a time.
•
Keep 15cm at least between the device and
other objects.
•
The 45 RPM adaptor allows you to play 45 RPM
records. Place the 45 RPM adaptor over the
spindle and gently place your 45 RPM record
onto the 45 RPM adaptor before playing.
Follow below steps to play your vinyl record.
1. Place the unit on a flat, even surface.
2. The turntable can play 33 , 45 and 78 RPM
records. Select the correct speed (33/45/78)
with the Speed Selector depending on your
vinyl record.
3. Place the vinyl record on the turntable platter
over the central spindle.
4. Remove Stylus (needle) Protector from Stylus
Cartridge.
5. Rotating the ON/OFF-Volume Rotary Knob
to turn on the appliance. Power indicator will
illuminate.
6. Rotate the Function Selector to "PHONO"
position to select the Vinyl record playback
mode.
7. Release the Tone Arm rest lock and ensure the
tone arm is free to move from the tone arm
rest. Use the Lift/Lower Lever to raise the tone
arm off its rest.
8. Move the Tone Arm carefully by hand to the
desired position where you want the record
to start playback. The turntable platter starts
rotating automatically. Use the Lift/Lower
Lever to gently lower the tone arm onto the
record automatically and playback the record.
9. Adjust the ON/OFF-Volume Rotary Knob to the
desired listening level.
10. At the end of the record, turn off the
appliance. Use the Lift/Lower Lever to lift the
tone arm from the record and return it to the
arm rest by hand. Guide the tone arm and lock
it securely onto the tone arm rest.
Note: If AUTO STOP is set to ON, the
turntable platter will stop rotating
automatically when the record is finished.
If AUTO STOP is set to OFF, the turntable
platter won't stop rotating when the record
is finished. You need to turn off the unit
manually.
11. Always lock the Tone Arm in place and
replace the Stylus (needle) Protector on the
Stylus Cartridge after use.
Note: Do not stop or turn the turntable
platter manually.
Moving or jarring the turntable without
securing the tone arm clamp could result in
damage to the tone arm and stylus.
LINE in operation
The appliance can be used as a power amplifier
to playback the programs from other audio device
(such as a radio, TV, MP3 or cassette deck etc.).
•
Ensure there is an external audio device is
connected through the LINE IN jack.
•
Rotating the ON/OFF-Volume Rotary Knob
to turn on the appliance. Power indicator will
illuminate.
•
Rotate the Function Selector to "LINE IN"
position to select the LINE IN mode.
•
Power on the external device and begin
playing. Adjust the ON/OFF-Volume Rotary
Knob to the desired listening level.
6
Advertisement
Table of Contents
