Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Mistral MAT10A-SP
- Page 1 Bluetooth Turntable Instruction Manual Model: MAT10A-SP...
-
Page 2: Safety Precautions
Safety Precautions • Do not place this appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to To ensure the proper operation, all the user and damage to the product. Do not the safety and operating instructions place it on top of any other appliance. - Page 3 9. When the record reaches the end of one • Do not attempt to dismantle or repair this unit yourself. Refer all servicing to qualified side, remember to lift the tone arm off service personnel. Servicing is required when the surface of the record by using the the appliance has been damaged in any Lift/Lower Lever and lock it to the tone way, such as the AC/DC adaptor has been...
-
Page 4: Product Overview
Product Overview Top View Spindle adaptor Lift/Lower Lever Speed Selector Auto Stop on/off switch Tone Arm Turntable Stylus (needle) Turntable Platter Cartridge Spindle Rear View Control Panel Line in jack LINE OUT SPEAKER Line out jack DC IN jack Function AUX output Selector (L/R) jacks... - Page 5 Connection Note: 1. When headphone or earphone is Speakers connection connected to the Phone jack, the main speakers will be automatically turned This appliance is designed to produce optimum off. sound quality when the supplied speakers are connected. 2. Be sure that your unit is set at a low Connect two speakers to the AUX output (L/R) volume level before connecting the jacks.
- Page 6 OPERATING 8. Move the Tone Arm carefully by hand to the desired position where you want the record INSTRUCTIONS to start playback. The turntable platter starts rotating automatically. Use the Lift/Lower Lever to gently lower the tone arm onto the Play Vinyl record record automatically and playback the record.
-
Page 7: Care And Cleaning
Bluetooth device automatically. Navigate to your Bluetooth 5. Do not use a coarse cloth, abrasive materials, device’s setup screen, find “MAT10A-SP” and or chemical cleaners such as alcohol, follow up the on-screen instruction to setup benzene, etc. -
Page 8: Troubleshooting
Troubleshooting Problem Possible cause Solution The unit does not operate The AC/DC adaptor is not Connect the AC/DC adaptor to connected to a power outlet. the AC outlet with power. The unit is not turned on. Rotate ON/OFF-Volume Rotary No correct playing mode Knob to the ON position. -
Page 9: Warranty Exclusions
Warranty Conditions For Purchase In Australia Any claim under this warranty must be made within 12 months of the date of purchase of the product. To make a claim under the warranty in Australia, take the product (with proof of purchase) to any Australia Post outlet. - Page 10 Notes...
- Page 11 Notes...
- Page 12 Cat. No. MAT10A-SP April 2021...