Camera Angle And Pir Area Settings; Horizontal Adjustment; Vertical Adjustment - Optex InSight INS-QXI-ST Installation Instructions Manual

Step

Camera angle and PIR area settings

4
Changing for each item in this step is optional.
Check the default settings and if no changes are required, proceed to the next item.

4-1. Horizontal adjustment

Remove the Back cover.
1
1
Raise the Back cover up.
2
Pull it back.

4-2. Vertical adjustment

PIR area adjustment
1
Caution
Do not use the vertical angle adjustment of the main unit other than adjusting
the detection area surface to be parallel to the ground inclination.
Horizontal ±95°
2
1
Parallel
Adjust PIR area direction
2
Vertical 0° to -20°
Adjust the detection range
6
NOTE
Only one side
needs to be loosened.