Pepwave MAX BR1 Pro 5G Setup Manual

PepWave MAX BR1 Pro 5G
Box Content:
1 x Protective Case
1 x 5G LTE Router
1 x Power Adapter
2 x Wi-Fi Antennas
4 x Cellular Antennas
1 x GPS Antenna
2 x Ethernet Cable
Extensions
Quick Setup:
1. Open router case.
case open during operation.
2. The antenna and ethernet
connections to the router are
already in place.
adapter and LAN Ethernet extensions
from router case.
3. Plug in the power adapter.
Please allow 5-10 minutes for the router
to establish a cellular connection.
Setup Video Guide:
Scan this QR code
with your phone
camera for video.
RENTAL EQUIPMENT
Always keep the
Take out the power
SETUP GUIDE
4. Please refer to this legend for
router status:
-Status LED Off, system initializing
-Cellular LED Blinking Slowly, connecting to
network(s).
-Status LED Green, Ready
-Cellular LED Green, connected to
network(s).
-Status LED Red, booting up or busy
-Status LED Blinking Red, boot up error
-Cellular LED Off, no cellular connection.
Wait up to 10 minutes, if it doesn't turn solid
green call for support.
5. Connect your wired devices (e.g.,
printer or laptop) Connect an
Ethernet cable to one of the female
ends of the ethernet extensions to
the rental equipment.
more than 2 devices on your order,
please an Ethernet switch to one of the
Ethernet extensions. (Ethernet switches
are rented separately!)
6. Connect your wireless devices
(e.g., iPad / Surface Go / Laptop)
Search on your wireless device for
the Routers Wi-Fi Network Name"
PEPWAVE#. The Wi-Fi password can
be found on the routers Quick Start
Guide, in the mesh pocket of the
case.
Contact our Support Team:
www.choose2rent.com/help
+1 (800) 622-6484 Ext. 3 (USA)
If you have