Troubleshooting - SC&T TTA111HD User Manual

LED Indication
LED Indication LED Color
Power Green ON/OFF
Switch Adjustment
Model Interface
M
TTA111HDT H
L
TTA111HDR M
H
TTA111HDT (transmitter) has to be configured from "L" level, and then start to adjust TTA111HDR

(receiver).
 If the video is not performing well, you can switch the frequency to "M" level on TTA111HDT and adjust
TTA111HDR again.
Option Model:
TPN008 2U Rack Mounting Panel
The heavy-gauge panel is designed to withstand the mechanical load of multiple cables.
Standard 19 inch (482mm) wide, 3.5 inch (88mm) 2U height.

Organizes up to 8 pieces of TTA111HDT or TTA111HDR.

Trouble Shooting
Make sure power and connection between Tx and Rx are wired in the right polarity.

Make sure both Tx and Rx devices are properly grounded to avoid voltage spikes.

DO NOT switch to High frequency at the beginning, since it might cause over-amplification.

To avoid signal over-amplification, please keep connection distance over 150M.

If video distortion, color change or no video shown, please properly adjust frequency and

brightness on TTA111HDR based on different distances.
3
Function
Power ON/OFF
Description
Medium frequency gain
High frequency gain
Brightness
High frequency gain + 6 dB
High frequency gain + 9 dB
High frequency gain + 11 dB
User Manual
TTA111HD