The upgrade includes the support of Field- • Pilot Assisted Steering. Connection to the The CenterLine 230BP (CL230BP) software 1.07 SCM is now via CAN. Existing FieldPi- provides the following enhancements to the system: lot 220 customers upgrading to FieldPilot Applied area now includes only the area under •...
System Confi guration Installation - Guidance Position the GPS antenna in the center of the vehicle Metal Mounting Plate at the highest point with a clear view of the sky. If the 65-05055; 60-10081 Velcro tractor cab is non-metallic, mount the metal plate in the center of the vehicle at the highest point with the Velcro strips and place the antenna on the plate.
Area Reset INITIAL SETUP SCREEN This is the initial CL230BP Setup At the end of the CL230BP power up sequence, the Screen. Press the Enter key to Area Reset window will be displayed: advance to the Boom Width screen. Setup screens will time out after 10 Area Reset retains existing bounded seconds of inactivity (changes will be and applied areas and A-B guide-...
Display Background setting. NOTE: The Plus and Minus keys control console brightness levels during Opera- tions modes. However, if GPS signal is not being received, the Plus and Minus keys will control the contrast level. CenterLine 230BP 020-020-UK R0...
DISPLAY BACKGROUND GPS SETUP The Plus and Minus keys toggle GPS Setup can be customized between light and dark backgrounds. to accept “ANY” available source Press the keys until the desired back- transmission (either uncorrected or ground is established. Press the En- differential), “GPS”...
Version Screen Screen Action Indicator (currently Mark Point A) Guidance Mode Straight A-B Guidance 6 km/h 6.0 MPH Vehicle Speed Curved A-B Guidance Circle Pivot Guidance Return to Point Indicator indicates a point is stored Headland Circuit CenterLine 230BP 020-020-UK R0...
Navigation Screen - Operation Swath Number + to the right of the A-B baseline - to the left of the A-B baseline Direction to main guideline Distance to main guideline Guidance Mode 6 km/h 6.0 MPH Straight A-B Guidance Vehicle Speed Curved A-B Guidance Circle Pivot Guidance Headland Circuit...
A. With the vehicle in motion, press the Mark A/B 6.0 Ft key to establish Point A. Drive around the Navigation Map Page Completed Circuit - perimeter of the fi eld. The CL230BP will auto- Screen Calculated Area CenterLine 230BP 020-020-UK R0...
matically close the boundary when the vehicle the screen. Drive to the location of Point B and is within one boom width of Point A. The Com- press the Mark A/B key again to establish the pleted Circuit (hourglass) will be briefl y displayed A-B line.
Naviga- pressing the Plus key. tion Screens. Pressing the Minus key after pressing the Plus key will abort the nudge feature and the guideline will remain the same. CenterLine 230BP 020-020-UK R0...
Need help?
Do you have a question about the CENTERLINE 230BP and is the answer not in the manual?
Questions and answers