Operating The Machine; Control Lever (Iso Pattern) - Hitachi ZAXIS 210LC-5N Operator's Manual

Control Lever (ISO Pattern)

d
WARNING:
 Never place any part of body beyond window frame.
It could be crushed by the boom if boom control
lever is accidentally bumped or otherwise engaged.
Never remove the window sash bar.
 Make sure you know the location and function of
each control before operating.
 Do not change the control lever operation pattern.
Failure to do so may result in operation mistake of
the machine.
A label showing the control patterns of the levers and pedals is
attached on the right side in the cab.
When a lever is released, it will automatically return to neutral,
and that machine function will stop.
1- Arm Roll-Out
2- Arm Roll-In
3- Swing Right
4- Swing Left
5- Boom Lower
6- Boom Raise
7- Bucket Roll-In
8- Bucket Roll-Out

OPERATING THE MACHINE

3-1
1
4
2
1
2
7
8
5
3 7 8
6
MDAA-01-288
M104-05-001
6
5
M104-05-002
3
4