Table of Contents
Advertisement
SELECT TIME ZO N E
You can select the zone
8
automatically or manually
by pressing CH
SH U TTLE PLU S
incorrect time is displayed
you may be receiving the
clock setting data of a PBS
channel from an adjacent
time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" in step 7 select "MANUAL" and select
the correct time zone manually.
● If you selected "AUTO", press
Semi-Auto Clock Set screen.
● If you selected
"MANUAL", press O K
and the screen to the
right appears. Move the
highlight bar (arrow) to
your choice by pressing
or SH U TTLE
CH
% fi , then press
PLU S
M EN U twice to return to
the Semi-Auto Clock Set screen.
SELECT D.S.T . MO DE
You have three choices:
9
a– Select " AUTO" and the
adjustment to your VCR's
clock will be made
according to the incoming
signal from the host
channel.
b– Select " ON" and the
adjustment will be made
based on the clock itself.
c– Select " OFF" if Daylight Saving Time doesn't apply to
you.
Move the highlight bar (arrow) to your choice by
pressing CH 5 ∞ or SH U TTLE PLU S % fi , then press
M EN U and the Semi-Auto Clock Set screen reappears.
IM PO RTAN T
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel when
the clock is being set. The current time will appear
automatically when the clock is set.
Downloaded from:
https://www.usersmanualguide.com/
TIME ZONE SELECT
or
=AUTO
MANUAL
% fi . If an
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
M EN U to return to the
TIME ZONE SELECT
=ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
D. S. T. SELECT
=AUTO
ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
M a nua l
SELECT MO DE
At the Override Auto Clock Set screen (
5
the highlight bar (arrow) to " MANUAL CLOCK SET" by
pressing CH
or SH U TTLE PLU S % fi , then press O K .
SET DATE, TIME AN D D.S.T .
The Manual Clock Set
6
screen is displayed and the
month digit begins
blinking. Press the
appropriate N U M BER keys
to set the date and time (if
only 1 digit, press "0" first).
Press CH
or SH U TTLE
% fi to set AM/PM
PLU S
and D.S.T. (Daylight Saving Time). Press O K after AM/
PM and D.S.T. settings.
Set D.S.T. to "ON" to set the D.S.T. according to the
VCR's clock or to "OFF" if D.S.T. doesn't apply to you.
When you're finished with this set-up procedure, press
M EN U to start the clock.
N O TES:
and SH U TTLE PLU S % fi can be used to
CH
●
perform all operations. (In this case, press O K after
each setting.)
● At the Manual Clock Set screen, the setting that can
be set blinks. When setting of a highlighted item is
completed, the highlight bar moves down by 1 line to
the next item.
MAKE CO RRECTIO N S
To change any of the settings, press O K or SH U TTLE
7
until the item you want to change blinks, then
PLU S
set as in step 6 .
Auto
SELECT MO DE
At the Override Auto Clock Set screen, move the
5
highlight bar (arrow) to "AUTO CLOCK SET" by
pressing CH
or SH U TTLE PLU S % fi , then power off
the VCR. Do not power it on again until the clock has
been adjusted. The clock is automatically adjusted on
the hour except at 11:00 PM, midnight, 1:00 AM and
2:00 AM. (The clock will be adjusted on the hour based
on the time displayed on the VCR, not on the actual
real time.)
**AU TO D AYLIGH T SAVIN G TIM E
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
11
EN
pg. 10), move
MANUAL CLOCK SET
DATE
1/ 1/97 WED
TIME
– –:– – AM
D. S. T.
ON
PRESS NUMBER KEY (O–9)
OR ( 5,∞), THEN (OK)
PRESS (MENU) TO END
Advertisement
Table of Contents
