LEROY-SOMER
1 - SUPPLY
1.1 - SHUNT excitation system
The alternator with Shunt excitation is self-
excited with an R 220 voltage regulator.
The regulator monitors the exciter excitation
current as a function of the alternator output
voltage. Very simple in design, the alternator
with shunt excitation has no sustaining
short-circuit capacity.
2 - R220 A.V.R.
2.1 - Characteristics
- Storage : -55°C ; +85°C
- Operation : -40°C ; +65°C
- Voltage regulation: ± 0.5%.
- Voltage supply/sensing range 85 to 139 V
(50/60 Hz)
- Rapid response time (500 ms) for a
transient voltage variation amplitude of ± 20%
- Voltage setting P1
- Stability setting P2.
SHUNT SYSTEM
Armature
5+
Field
P1
ST4
Potentiometer for remote
voltage adjustment
P2
ST3
50 Hz
4
CALL US TODAY
CALL US TODAY
1-888-POWER-58
1-888-POWER-58
Installation and maintenance
MAIN FIELD
6-
Voltage
Option
Stability
Frequency
60 Hz
parts@genpowerusa.com
parts@genpowerusa.com
R220
A.V.R.
- Power supply protected by 8 A fuse, slow-
blow action (tolerates 10 A for 10 s)
The fuse is impregnated in the resin,
therefore it can not be replaced.
- Frequency: 50 Hz with ST3 jumper - 60 Hz
without ST3 jumper.
- The size of the screwdriver tip used to
adjust the potentiometer is 2.5 mm.
2.2 - R220 AVR option
Potentiometer
adjustment, 1000 Ω / 0.5 W min: adjustment
range ± 5%.
- Remove the ST4 jumper.
For wiring up the external potentiometer;
the "earth" wires must be isolated as
well as the potentiometer terminals
(wires at the same voltage as the power).
STATOR : 12 wires (marked T1 to T12)
VOLT POT 1K
REQUEST A QUOTE
REQUEST A QUOTE
4291 en -
2013.03 / d
for
remote
T1
T7
T2
T8
T5
T11
T4
T10
110
0V
124 mm
www.genpowerusa.com
www.genpowerusa.com
voltage
T3
T9
T6
T12
SHOP ONLINE
SHOP ONLINE