Table of Contents
Advertisement
202
4-2. Adjusting the preferred driving position
mately 3 seconds.
Driving position recall procedure
1
Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver's door using the
smart access system with push-but-
ton start or wireless remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel and head-up display [if
equipped]). However, the seat will move to
a position slightly behind the recorded
position in order to make entering the vehi-
cle easier.
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the power switch to ACC or
ON, or fasten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) will move to the
recorded position.
Memory recall function cancelation
procedure
Carry only the key you want to cancel
and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled
properly.
1
Check that the shift position is in P.
2
Turn the power switch to ON.
3
While pressing the "SET" button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If it button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■
Recalling the driving position using the
memory recall function (vehicles with
the My setting)
Different driving positions can be regis-
tered for each electronic key. Therefore, the
driving position that is recalled may be dif-
ferent depending on the key being carried.
■
Recalling the driving position using the
memory recall function (vehicles with-
out the My setting)
Different driving positions can be regis-
●
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If a door other than the driver's door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
Jam protection function
■
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
than the set seat position. Check the seat
position.
Customization
■
Some functions can be customized.
(P.587)
Advertisement
Table of Contents
