Table of Contents
Advertisement
146
2-2. Driving procedures
Shift position display and how to
change the shift position
P position switch
A
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shift position indicator
B
• Meter display:
The current shift position is illuminated.
• Rotary shifter display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
Rotary shifter
C
Operate the dial shift gently and securely.
To switch to N, hold down the dial shift and
hold it for a while.
To switch to R or D, hold down the dial shift
and turn left or right according to the
arrow on the shift position indicator.
Release the rotary shifter after each shift-
ing operation to allow it to return to its reg-
ular position.
When shifting from P to N, D or R, from N,
D or R to P, from D to R, or from R to D,
ensure that the brake pedal is being
depressed and the vehicle is stationary.
Changing the shift position in each
■
power switch mode
●
The shift position cannot be changed
when the power switch is in ACC or off.
When the power switch is in ON, if the
●
"READY" indicator is not illuminated, the
shift position can only be changed to N.
●
When the "READY" indicator is illumi-
nated, the shift position can be changed
from P to D, N, or R.
●
When the "READY" indicator is flashing,
the shift position cannot be changed from
P to any other position, even if the rotary
shifter is operated. Operate the rotary
shifter again after the "READY" indicator
changes from flashing to illuminated.
Shifting the shift position from P to other
■
positions
●
While depressing the brake pedal firmly,
operate the rotary shifter. If the rotary
shifter is operated without depressing the
brake pedal, the buzzer will sound and
the shifting operation will be disabled.
When selecting the shift position, make
●
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument cluster.
■
The shift position cannot be changed
when
In the following situations, a buzzer will
sound to inform you that the shift position
cannot be changed. Use the appropriate
operation to attempt to change the shift
position again.
Advertisement
Table of Contents
