Table of Contents
Advertisement
Matrix 908 Field Computer
NO.6 SET UP MAPPING LOCATION
Mapping location establishes the location from which the
boundary will be mapped.
• Default location –
X W ithoutaDeviceDefined–theMappingLocationwill
be the Vehicle Pivot Point
X W ithaDeviceDefined–whilecreatinganexterior
boundaryorpolygon,thelinewillbetotheexteriorof
the outermost active section. While creating an interior
boundary, the line will be to the interior
of the innermost active section. If no
sections are active, the boundary will
be marked to the end of the outermost
section.
• User entry – in-line and lateral offset from
the vehicle pivot point directions and
distancescanbespecifiedbytheuser.Upto
five(5)userentriescanbecreated.
TonavigateintheMappingLocationSettings:
NewMappingLocation–usetocreate
a new mapping location
DeleteCurrentMappingLocation–
use to delete the current Active
MappingLocation
Change Active Mapping Location
1. Selectthe
Active Mapping Location
2. SelectthedesiredMappingLocation
Edit a Mapping Location
1. SelecttheMappingLocation
2. Make adjustments to settings as needed.
Changes are automatically applied to the
current mapping location.
Figure 1: Mapping Location In-Line Distance from the Vehicle
Pivot Point
to the Mapping Location
20
www.teejet.com
.
.
to be edited.
Figure 2: Mapping Location Lateral Distance from the Vehicle
Centerline
to the Mapping Location
Advertisement
Table of Contents
