Indoor Unit Fixing - Toshiba MMK-UP0051DHPL-E Installation Manual

7

INDOOR UNIT FIXING

1. Pass the pipe through the hole in the wall,
and hook the indoor unit on the installation
plate at the upper hooks.
2. Swing the indoor unit to right and left to
confirm that it is firmly hooked up on the
installation plate.
3. While pressing the indoor unit onto the
wall, hook it at the lower part on the
installation plate. Pull the indoor unit
toward you to confirm that it is firmly
hooked up on the installation plate.
2
Press indoor unit
to lower hook
• For detaching the indoor unit from the
installation plate, pull the indoor unit toward
you while pushing its bottom up at the specified
parts.
Push
Push
23-EN
1
Hang indoor unit's
hook here
Installation plate
Press
(unhook)
MOUNTING INDOOR UNIT TO THE
INSTALLATION PLATE
• The lower part of indoor unit may float, due to
the condition of piping and installer cannot fix
it to the installation plate. In that case, use the
screws provided to fix the indoor unit with the
installation plate.
• Especially when the pipes are pulled out to
the left side, the indoor unit must be screwed
to the installation plate.
Screw
DIRECTLY MOUNTING INDOOR UNIT TO
THE WALL
• In case left side or right of indoor unit may
float, the provided screws should be used to
fix the indoor unit directly to the wall at the
predetermined position.
• In the case of block, brick, concrete or similar
type wall, determining the mount screw
position on the wall can be used symbol (►)
on the main body of indoor unit for drill hole to
insert clip anchors for appropriate mounting
screw.
‒ 23 ‒
Installation Manual
CAUTION
Installation plate
Indoor unit
Screw
Screw
Mounting screw
position
Reference
symbol
Front panel
Mounting screw
Air inlet grille
Wall