Using The Pulse Button - Oster 6710 User Manual

5
Press the START/STOP (or Pause/Resume)
button when you finish. The START/STOP light
will blink again.
6
If you wish, you can press the START/STOP
button again to continue at the same speed.

Using the Pulse Button

To MANUALLY run the product in short bursts use the
Pulse button. Pulse only works in MANUAL mode or
after a program has finished. Pulse continues from
the last selected action. So, if the last action was at a
High setting, you will now Pulse at High. If the last
action was at a Low setting, you will now Pulse at
Low.
1
Press and hold in the Pulse button. PULSING!
flashes as the product pulses at your selected
setting.
18
Using your Product
Speeds
Low High
Press when
STOP
finished.
Speeds
Low High
PULSING !
M A N U A L