Dahlert DT-WP-22 Instruction Manual page 8

Take water
1. Click any icon to light up the
screen, the screen activation time
is 3min.
3. Other options
First select the corresponding temperature,
press the Water Output button to take
water.
Replace the filter
NOTE
• The filter can be replaced by yourself. Available for purchase at www.dahlert.com.
• A small amount of residual water may flow out during the process of replacing filter,
which is normal.
1. When all of the three grids of the filter
life flash, please contact our distribution.
Filter life
6
2. Normal temperature water
After the screen is on, the temperature is
automatically selected as normal temperature
water, click the Water Output button to
discharge the water.
2. The power must be cut off before replacing
the filter.