Advertisement
Choose Your Menu Style
7. Select a category of menu styles from the
Category drop-down list.
8. Scroll through the list, click the style to use for
your menus, and click the Next button.
Set Recording Parameters
9. Select your record settings from Record drop-
down list.
10. Select the quality for your recordings from the
Set Quality drop-down list. Refer to the table
below for more information on video quality
settings and record time.
Make the Recording
You can use the VCR playback control buttons to
locate the video you want to record on the DVD.
11. Click the Record button to begin recording.
12. Click the Stop button to finish recording. A
message displays on the screen to indicate the
process is complete.
If you select a video
quality setting of...
Best
Better
Good
Note: A typical Direct-to-DVD project using a 60 minute tape will take 60 minutes to capture and an additional 60 minutes to
author to DVD. Project times may vary if you perform editing.
Click to
select style
Scroll to
desired
style
Select to
give menu
buttons
and text a
3-D effect
Choose
the video
quality
You can fit this amount of video on the disc...
DVD (4.7 GB)
60 minutes
120 minutes
180 minutes
Choose what you
want to record
Rewind
Play
Stop
CD (700 MB)
9 minutes
18 minutes
27 minutes
Move
Move
back one
forward
frame
one
Fast
frame
forward
CD (650 MB)
8 minutes
16 minutes
24 minutes
Add
chapter
points
automati-
cally
Advertisement
