Hisense 32A4KV Quick Setup Manual page 5

Attach the wall mount bracket (not included)
Before you begin the third-party manufacturer instructions, be sure to do the following
things:
1. Place the TV face down on a clean, safe
and cushioned surface.
2. Remove the TV stand if you have already
attached it.
3. Place spacers (not included) in the
corresponding bracket holes.
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• When you attach the mount, be sure to use spacers (provided by the third-party
manufacturer) between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure to
use fixing screws (not included) that are 8.0 - 10.0 mm in length when measured from
the attaching surface of the rear cover.
8.0 - 10.0 mm
Wall mount bracket
Screw
Spacer
Rear cover of the TV
• We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains
parallel to the wall and does not lean forward.
NOTE:
• If installed on a ceiling or slanted wall, or the television installed is not parallel to the
wall, the television may fall and result in property damage or severe personal injury.
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket model.
(not included)
Wall mount hole pattern(mm)
Wall mount screw size
3
Screw
(not included)
Spacer
Bracket
(not included)
100 × 200(32")(81.2 cm)
200 × 200 (40"/43")
(101.6 cm/109.2 cm)
M6
TV
screen
Vertical
surface