Oregon Scientific RM328PA Instruction Manual page 6

calendar mode
alarm mode
To change the calendar display to the alarm-time display:
• When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
• When the alarm time is displayed, press CLOCK once.
HOW TO SET THE CALENDAR
CLOCK MANUALLY
If the RM328PA is taken outside of the range of US WWVB radio
signal it will need to be manually set.
To manually set the clock:
1. When the calendar is displayed, press CLOCK for two seconds.
The hour value will start to blink.
2. Enter the month using the [
either button to rapidly increase or decrease the value.
] and [ ] buttons. Hold down
3. Press CLOCK to confirm and proceed to set the minute, year,
month, day and display language.
4. For the display language, you can choose between (E) for
English, (F) for French and (S) for Spanish (see language chart
above).
5. When finished, press CLOCK to return to normal display. If
changes are made during the process, the seconds will reset and
start from zero.
HOW TO SET AND ACTIVATE
THE ALARM
To set the alarm time:
1. Press and hold ALARM for two seconds when the alarm time is
displayed.
2. Enter the value for the hour digits. Press ALARM to confirm and
go to the minute digits. Enter the value and press ALARM to
confirm.
3. The alarm is automatically activated. To deactivate it, press
ALARM once.
ALARM AND SNOOZE FUNCTION
When the alarm is set, it will activate at the set time. The back light
will go on for five seconds with the alarm-on icon [
The crescendo function allows the alarm to start gently and step up
its intensity in three steps. Without interruption, the alarm will
activate for a minute.
6
] flashing.