Honeywell Silent Knight EVS-CE4 Product Installation Document

EVS-CE4
Audio Circuit Expander
Product Installation Document

1 Description

The EVS-CE4 is an Audio Circuit Expander that adds four audio circuits to the EVS-50W or EVS-125W. The EVS-CE4 mounts inside the EVS-50W
or EVS-125W cabinet.
NOTE:
Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.

2 Compatibility

The EVS is compatible with the following Silent Knight Series FACPs:
• 6820EVS
• 5820XL-EVS
NOTE: For more information, refer to the FACP Installation Manual or EVSSeries Manual (PN LS10062-001SK-E).

3 Specifications

• Standby Current: 20mA
• Alarm Current: 180mA

4 Installation

1. Remove AC power from the EVS-50W or EVS-125W Amplifier and disconnect the backup batteries.
2. Mount the EVS-CE4 in the EVS-50W or EVS-125W cabinet using the four supplied screws.
Document LS10070-001SK-E:B2
C I R C U I T 4 C IR C U I T 3 C IR C U IT 2 C I R C U IT 1
+ I N – + O U T – + I N – + O U T – + IN – + O U T – + I N – + O U T –
Figure 1 Mounting the EVS-CE4
12/8/2021 ECN: 151062
secure with screws
CIRCU IT 5 CIRCU IT 6
+ OU T – + IN – + OU T – + IN –
EVS-CE4
CIRC U IT 8 CIR CU IT 7
+ OU T – + IN – + OU T – + IN –
secure with screws