Download Print this page

Denver BAS-18500 User Manual page 9

Hide thumbs Also See for BAS-18500:

Advertisement

Received
Received SMS messages can be stored either in the phone or in SIM
memory.
When you have received a message, you will be alerted by a
ringtone or vibration (as defined in the menu [User profiles/profiles
options/Customize/Tone setup/Message tone]) and the message
icon will also be shown on the screen. Press the left soft key [View]
or the OK button to read the new message, press the right soft key
[Cancel] to return, to access the inbox to read the message.
If the message memory is full, "Memory full" and the message icon
will flash on the display. Before you can receive new messages,
delete some of your old messages in the inbox folder. If the capacity
of new messages is beyond the capacity of the inbox, the
information will be lost.
In the message list, press the OK button or the left soft key [Options] to
enter the following menu:
View: View information content.
Reply: Reply to the SMS sender directly.
Call sender: Call the message sender directly.
Forward: Forward the message to someone else.
Delete: Delete the message.
Delete all: Delete all messages.
Save to phonebook: Add to a new contact or existing contact
Advanced: Other phone settings
Note: 1. To send SMS, you need to set the correct SMS service
center number which can be obtained from your network provider.
2. If [SMS settings/Common settings/Save sent message] is [On],
the successfully/unsuccessfully sent SMS will be both saved to
Outbox; otherwise the SMS will not be saved.
If [Save and send] option is selected when sending the message,
the sent SMS will be saved to the Sent folder.
In the sent message list, press the OK button or the left soft key to read
the selected message.
Unsent
Here you can view text messages that have not been sent successfully or
draft text messages.
Sent

Advertisement

loading