VIDEO SETTINGS
UI Element
Output Timing
Output HDCP
Screen
CEC
One Touch Play
Standby
Apply
CEC Test
Hall Technologies
March 30, 2023
Description
Set the output resolution for HDMI Out. Two operation methods are offered.
Auto: select to output the maximum resolution supported by display based on the
display's EDID. E.g. If display supports up to 4K@30Hz, the device outputs 4K@30Hz.
Resolution range list: select a desired output resolution from the drop-down menu to
output this fixed resolution.
By default, it's set as Auto.
Set the HDCP capability for HDMI Out and HDBT Out.
Follow: Set the output HDCP of HDMI Out to follow the HDCP capability of the video
input.
HDCP 2.2 or 1.4: Set the output HDCP of HDMI Out to HDCP 2.2 or 1.4.
By default it is set as Follow.
By default, the output screen is set to single screen. If two sources are connected such as a
laptop and a mobile device the setting Split Screen can be selected to show both sources
side by side.
Click to enable/disable CEC control on display.
Default setting: Enable
The display will turn on with the correct CEC command when a source is connected to HT-
CALIPSO.
The display will turn off with the correct CEC command when the HT-CALIPSO goes into
standby mode.
Click to apply setting changes.
Used to test the code entered for One Touch Play or Standby.
Page 32 of 39