Settings Page; General Settings - Hall Technologies HT-CALIPSO User Manual

Settings Page

GENERAL SETTINGS

UI Element
Device Name
IP Method
IP Address
Subnet
Gateway
Apply
IP Conflict Detection
Hall Technologies March 30, 2023
Description
Change the device name if desired. This name also acts as the name of soft AP and the
receivers of AirPlay and Miracast.
Note: The name must be 1~20 characters in length, including letters, numbers, "_" or "-".
By default, it is set as HT-CALIPSO.
Select the desired IP mode between DHCP and Static. (Default is DHCP)
Set the IP address manually if Static mode is selected.
Set Subnet Mask manually if Static mode is selected.
Set gateway address manually for the device to communicate with another network that
uses different communication protocols when Static mode is selected.
Click to apply setting changes. Note: After the IP settings are changed, please refresh the
Web UI page to re-login.
In DHCP mode this ensures the HT-CALIPSO will not select the same IP address as another
device on the network.
Page 31 of 39