Siemens SIMATIC S7-300 Equipment Manual page 5

Structure of the documentation
The documentation for this device consists of the following parts:
• Manual Part A: Configuration manual "Configuring and Commissioning S7CPs for
Industrial Ethernet", see references /1/ (Page 73).
• Manual Part B: Manual "CP 343-1 Lean" (this manual)
• Program blocks for SIMATIC NET S7 CPs - programming manual, see references /10/
(Page 76)
Contains the detailed description of the program blocks for the following services:
– Open communication services
– Access coordination with FETCH/WRITE
– Connection and system diagnostics
– Programmed connections and IP configuration
– PROFINET IO
Current manual edition on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Automation Customer Support under the following entry ID:
Link: (http://support.automation.siemens.com/WW/view/en/23643456)
CP documentation on DVD
You can find the documentation on the product and the configuration on the DVD supplied
with the product. This DVD contains the product manuals valid at the time it is created.
Version History / Current Downloads for the SIMATIC NET S7 CPs
The "Version History/Current Downloads for SIMATIC NET S7 CPs" provides information on all
CPs available up to now for SIMATIC S7 (Industrial Ethernet, PROFIBUS and IE/PB Link).
An up-to-date version of this document can be found at on the Internet under the entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109474421)
License conditions
Note
Open source software
The product contains open source software. Read the license conditions for open source
software carefully before using the product.
You will find license conditions in the following document on the supplied data medium:
• OSS_CP3431_86.pdf
CP 343-1 Lean
Equipment Manual, 01/2023, C79000−G8976−C198−09
Preface
5